To install a thermostat in a 1992 Nissan 240SX, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Take out the old thermostat and gasket, clean the mating surfaces, place the new thermostat in the housing (ensuring it's oriented correctly), and install a new gasket or use RTV sealant. Finally, reattach the hose, refill the coolant, and reconnect the battery.
Wat are the tps volt settings for a 1992 Nissan 240sx
on the dampener pulley
Yup, the bell housings are exactly the same.
My 1992 Nissan 240 sx is 038
Yes, some '92 240sx' came with the ka24de motor.
1-3-4-2
the 95 has KA24DE engine; yours is the same. you should be able to use them near interchangeably.
yes, all it is is an sr.
The thermostat is located directly back from your radiator cap and approx. 6 inchs below the top of your motor. It is connected to the lower radiator hose so if you follow it up to the front of the motor there is the thermostat housing. It is also mounted by 3 small bolt, the one on the bottom you will have to feel for.Be sure to look at the direction of the thermostat as you remove it so you install the new one the same way.
Begin by removing the wiring harness from your 1992 Nissan antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.
NO, bellhousings are different.
dexron 2 fluids