0
To install a top on a 1991 Isuzu Amigo, first ensure you have the correct replacement soft top or hard top for the model. Begin by removing any existing top and cleaning the mounting area. Align the new top with the mounting points and secure it using the provided hardware or clips, making sure it is taut and properly fitted. Finally, check for any gaps or loose areas to ensure a weather-tight seal.
What else can I help you with?
How can I convert my 1999 Isuzu amigo soft top to a hard top?
well follow these steps i found for converting a hard top to soft top.... just follow the directions in reverse.... the web page is: http://www.geocities.com/madisoneastclassof1993/amigo/
How do you remove a 99 Isuzu amigo hard top?
http://www.geocities.com/madisoneastclassof1993/amigo I found this site to be helpful for removing the non-removable hardtop on 2nd gen Amigos...
Taking the hard top off an Isuzu Amigo?
I am pretty sure that gen 2 amigos (97-03) are non-removable
What degree before top dead center is the distributor on a 2992 Isuzu amigo 2.6l?
there should be numbers on your distributor cap inside and out
Where is the ECU located on 1998 Isuzu Amigo?
For the 2.2 liter engine it's located between the fire wall and the engine near the top.
How do you take the hard top off an Isuzu amigo?
To remove the hard top from an Isuzu Amigo, start by ensuring the vehicle is parked on a flat surface and the ignition is off. Disconnect any wiring for the rear defrost or other electrical components, if applicable. Next, locate and remove the bolts or screws securing the hard top to the body, usually found at the rear and sides. Finally, carefully lift the hard top off with assistance, as it can be heavy and cumbersome.
How do you change a 1999 Isuzu Amigo soft top to hard top?
To change a 1999 Isuzu Amigo from a soft top to a hard top, first, remove the soft top by unfastening any screws, clips, or fasteners holding it in place. Next, carefully detach the soft top frame and any associated components. Once the soft top is removed, align the hard top with the vehicle's mounting points and secure it using the appropriate hardware. Ensure all seals are properly fitted to prevent leaks and check that all electrical connections, if applicable, are reconnected.
Will a soft top from a 94 Amigo fit a 99 Amigo?
No...
How do you remove the hard top on a 2000 Izuzu amigo?
To remove the hard top from a 2000 Isuzu Amigo, first ensure the vehicle is parked on a flat surface. Begin by removing the bolts that secure the hard top to the body, typically found along the edges of the top and in the rear. Once the bolts are removed, carefully lift the hard top off, ensuring you have assistance as it can be heavy and cumbersome. Finally, store the hard top in a safe location to prevent damage.
Will 1999 amigo Hard top fit a 1998 soft top amigo?
yes sir. 98 and 99s share the same top.
Where is the engine control module on a 1991 Isuzu Trooper?
The engine computer on 1991 Isuzu Troopers is mounted on top of the transmission hump, under the center console in the cab of the vehicle. If you have the 4L30E transmission then the transmission computer is mounted next to the driver side (Left) front speaker.
How do you put the top down on 1998 Isuzu amigo?
I have an 98 amigo,First take out at least the side windows or you'll rip them.Then on the inside of the passanger compartment tward the back on the solid side of the roof there are 2 clamps,push the button and pull the lever down.Push the top back.You should latch it down so it won't pop up on a good bump.Good Travels.
