loosen bolt at center of tensioner pulley slightly, locate Phillips screw directly behind pulley facing up and turn counter clockwise to release tension on belt.
Disconnect the battery, loosen tensoiner, " the top middle wheel, under distributor cap" disconnect the wires on the alternator , unbolt and good to go
the alternator belt is the one all the way in the back. You have to loosen the power steering pump, A/C idler pulley, and then loosen the alternator.
You remove no pulleys. Just loosen the belt and then remove the alternator.
To change the alternator on a 1997 Chrysler LHS, first detach the negative battery cable using a wrench and loosen the alternator lower mounting bolt. Next, remove the upper radiator support and loosen the alternator pivot bolt. Then, slip the belt off the alternator's pulley and remove the alternator mounting bolt.
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Loosen the tensioner pulley. Remove the alternator belt. Remove the wiring cables from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
On a 4 cyl. you loosen the bolt that holds the adjuster to the alternator and then loosen the adjusting screw. You may need to hold pressure on the alternator to help it move or also loosen the bottom mount bolt of the alternator to the engine to allow the alternator to move easily. On a v6 you loosen the center nut on the adjuster pulley and then loosen the adjuster screw. Remove the old belt and install the new one. adjust the pulley to tighten the belt and tighten the pulley or tensioner. Belt is now installed.
you loosen the bolts on the opposite sides of it. then, you change the alternater, and tighten the bolts.
theres 2 bolts on the alternator 1 of them is to loosen the belt of and the other is to remove the alternator all together i hope that's a helpful answer to your question
The 2000 Dodge Caravan alternator can be changed by removing the alternator belt. Remove the wiring harness from the back of the alternator. Loosen and remove the alternator retaining bolts. Install the new alternator by reversing the process.
Remove the wiring harness from the back of your 2003 Mitsubishi Eclipse alternator. Loosen the alternator tensioner bolt. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Loosen the tensioner bolt on your 1990 Buick LeSabre alternator. Slide the alternator to the left and remove the alternator belt. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.