How do you program a remote in a Mitsubishi Magna?

Answer 1

Reprogramming Remotes (from martybugs.net - this works I have done it)

Note that your local Mitsubishi dealer can reprogram remotes, but they will charge you. Rather than paying your Mitsubishi dealer, you can easily reprogram the remotes yourself in a few minutes.

You'll need to have all the remotes for the car when programming, because once you place the car into program mode, it will forget all previous remotes.

# To place the car into program mode, turn the ignition between ACC and IGN three times within a 5 seconds period, and then leave at the IGN position.

# The hazard lamps will flash once to indicate the car is now in program mode.

# Within 5 seconds of this acknowledgment, press any button on the first remote.

# The hazard lamps will flash once to indicate acceptance.

# Within 5 seconds press any button on the next remote to be taught. This process may be repeated for up to four keys.

# Program mode will be terminated by any of the following events:

#* The ignition is turned off. #* More than 5 seconds have elapsed since the last valid key code. #* Four keys have been taught to the BEM. #* No correct data has been received in 10 seconds.