GO TO WWW.AUTOZONE.COM AND CLICK ON VEHICLE SPECS. ENTER YOUR CAR MODEL AND YEAR AND LOOK AT THE DIAGRAM.
The distributor wiring order for a 1996 Honda Civic is 1-3-4-2. The distributor will be have the wires in the clockwise position starting a 1.
All of the spark plug wires go to the distributor. Just follow the wires and you will see the distributor.
To change the distributor rotor on a1998 Honda Civic unplug the spark plug wires from the cap. Loosen the screws and remove the cap on the unit. Be sure to properly line the new cap on the distributor and install.
The ignition coil on a 1998 Honda Civic LX is located under the distributor cap. The distributor is on the passenger side of the motor and has wires running from it to each spark plug. it is usually plastic.
It will have a black cap on it with 4 wires coming out and each wire going to a spark plug. Follow the wires from the spark plugs backward and you will find the distributor.
In the distributor. Remove cap and it is the large black(in most cases) box with four screws and two wires.
you really cant find it? the spark plug wires only come off of it! back of the cylinder head!
The 2002 Honda Civic EX engine uses coil-on-plug. There are no sparkplug wires.
It is located under your distributor cap, behind the rotor. There are two bolts on the side of the distributor that must be loosened, take off the three wires, and it will come right out.
yes they will
what are the wires to power up the ecu on a 1994 Honda civic si
Inside the distributor at the bottom right hand side of it. Take the cap off and you will see it connected to 4 wires.