0
What else can I help you with?
2001 Daewoo nubira timing?
Is your timing belt broken?
When to change timing belt Daewoo Nubira?
Every 60,000 miles
When do you change the timing belt for a 2000 daewoo nubira?
every 60,000 miles
When should timing belt be changed on Daewoo Nubira 1999?
Less then 60,000km
Is a 2002 daewoo nubira 2.3 l engine an interference engine?
According to the Gates website ( they make timing belts etc. ) the ( 2.0 liter engine ) in a 2002 Daewoo Nubira ( is an interference engine )
Need to no were timing mark is on crank pulley on 1999 daewoo nubira?
Check the crank shaft pulley
How do you Change a water pump on a Daewoo Nubira?
It is located behind the timing belt cover and is driven by the belt. There are many steps to get to it so it is best to get a manual and do the timing kit at the same time
Where are the timing marks on a 2001 1.6 Daewoo nubira dohc?
On a 2001 1.6 Daewoo Nubira DOHC engine, the timing marks are located on the crankshaft pulley and the timing cover. You will find a mark on the crankshaft pulley that aligns with a reference point on the engine block. Additionally, there are marks on the camshaft gears that should align with the timing cover when the engine is at the top dead center (TDC) of the first cylinder. Always ensure the engine is at TDC before making any timing adjustments.
Replaced timing belt and engine knocks on daewoo nubira?
If your Daewoo Nubira is knocking after replacing the timing belt, it could indicate that the timing is off, leading to improper engine timing and potential valve damage. It's essential to double-check the timing alignment and ensure all components were installed correctly. Additionally, check for any loose parts or debris that may have been introduced during the replacement process. If the issue persists, consulting a mechanic for a thorough inspection is recommended.
Where is the crankshaft sensor located in a dtec engine Daewoo Nubira 98?
Under the timing belt cover, sensor runs of tooth wheel on timing belt crank cog. job and a half.
Timing belt replacement on 2001 daewoo nubira?
For a 2001 Daewoo Nubira, the timing belt replacement is typically recommended every 60,000 to 100,000 miles, depending on driving conditions. To replace the timing belt, you'll need to remove various components, including the engine cover, serpentine belt, and possibly the water pump. It's crucial to align the timing marks correctly during installation to ensure proper engine timing. Given the complexity, if you're not experienced with engine work, it's advisable to seek professional assistance.
I do have 2000 daewoo nubira 2.0 l timing betl broke. do i need work on engine?
yes,it is an interference motor.I just did one and it bent all the intake valves.
