0
Yeah finally a question I can answer. I bought those pre cut tint on eBay and had to take the door apart and when I bought them side mirror with lights I had to remove the door compeletly. Well There are three hidden screw on both the front door and just one hidden one on the both the back doors. First the front doors. just pry very gently on the speakers and they just pop out, I could use my tumb and middle finger to pull on it and pops out. The hidden screw is located in of course where you open the door. There is a round shape cover. you just insert a tiny object like a needle or a ice pick and just pry out and the cover pops out very easy. there is a screw there, that it out. even though the door is open when your working on it, go ahead and pertend to open the door and slide that piece of plastic off. when you are putting it back together remember to do the same so the screw holes line up very easily. just pretend to open the door and slide that plastic on all the way. now at the bottom of the door there is a light cover. use your hand and just pull it out. it pops out very easy too. now for the hidden screw. use the ice pick or screw driver and where you stick your hand to close the door there is a rubber mate type thingy that holds the crums and dirt. pry the rubber gently half way and there is a screw there. Now start to unpop the door out and lift up and it will come lose easy. To take the door compeletly off there are only the five screw that is holding them on and they are visible between the door. Now the two back doors. there is the hidden screw in that rubber handle that you use to close the door with. that's it, then you just pry it and it pops out. Nothing to it really. Have fun. I love my Mazda 6 and have been taking it apart to add a bunch of cool stuff. Have a great day. Cheers
What else can I help you with?
How do you remove the rear door speakers on a 2003 Mazda 6?
remove door panel, remove speeker.
How do you remove the door panel off the driver side door of your Mazda 6 2006 with the door closed?
Nobody knows.. Or they wont tell you... Have to take it to the mazda dealer...
Where is the interior light switch on a 2007 Mazda 6?
In a 2007 Mazda 6, the interior light switch is typically located on the overhead console, near the front ceiling lights. It may also be integrated into the door switches, which control the interior lights when the doors are opened or closed. For manual control, you can use the switch to toggle the lights on or off as needed.
How do you remove the interior door panels on a 2007 Nissan Frontier to install aftermarket speakers?
1. Remove the rubberized armrest cover by prying it upward. 2. Remove (by prying out) the silver U shaped trim by the interior door handle. 3. Remove (by prying out) the sunken trim piece behind the interior door handle. 4. Remove the 10mm hex screws from where the armrest cover was and behind the door handle lever. 5. Pry the sides and bottom of the door panel loose. 6. Carefully lift up and out on the door panel and disconnect the wiring harness for the power locks & windows.
How do you replace passenger side mirror Mazda 6 2010?
To replace the passenger side mirror on a 2010 Mazda 6, first, disconnect the battery to ensure safety. Remove the interior door panel by unscrewing any visible screws and carefully prying off clips. Once the panel is off, disconnect the wiring harness for the mirror, then unscrew the old mirror from the door. Install the new mirror by reversing the steps, reconnecting the wiring, and securing the door panel back in place.
How do i remove the drivers side door panel on a 2012 Mazda 6?
To remove the driver's side door panel on a 2012 Mazda 6, start by disconnecting the negative battery terminal for safety. Then, use a flathead screwdriver to gently pry off the plastic cover behind the door handle and remove the screws underneath. Next, carefully detach any clips holding the panel in place, and lift the panel upwards to free it from the door. Finally, disconnect any electrical connectors before fully removing the panel.
How do you remove the CD deck from Mazda 6?
Take off your door and sell it to a hobo for a hammer then smash it with the hammer and it will come out easily ........................................................................................................................................................................................................................................................................................................but it wont go back on
How do you remove door panel of a 2008 Mazda 6?
To remove the door panel of a 2008 Mazda 6, start by disconnecting the negative battery terminal to prevent any electrical issues. Use a flathead screwdriver to gently pry off the window and door lock switches, then remove any screws securing the panel, usually located behind these switches and near the door handle. Next, carefully detach the panel from the door frame by pulling it away, making sure to unclip any retaining clips. Finally, lift the panel upwards to free it from the door, taking care not to damage any wiring connected to the switches.
Door Speaker size for 1999 Mazda 626?
Door speaker size. 6 X 9
How do you remove the rear door panel and install a new window motor on a 2000 Ford Focus?
1. Remove the door Pull-handle cover, by inserting a screwdriver into the access hole on the bottom of the handle, and using the screwdriver as a lever, pop off the handle cover. 2. Remove the button covering a retaining screw in the interior door latch backing plate. 3. Remove the 8 Torx� retaining screws around the perimeter of the door panel, and the single Torx� retaining screw in the interior door latch. 4. Remove the 2 hex bolts in the door handle. 5. Gently lift the panel upwards, to disengage the window weather-strip molding. 6. Remove the Door Latch Trim Panel, be sure to unplug the Power Lock Switch, and remember how the wire was run. 7. Remove the interior door latch, by gently pulling out on the front corner, which is held in by a plastic compression spring.
How do you take the door panel off when the door is shut on a Mazda 6 2004?
To remove the door panel on a 2004 Mazda 6 with the door shut, start by carefully prying off the plastic trim covering the door handle and window switches using a flathead screwdriver or trim removal tool. Next, locate and remove any screws securing the panel, typically found near the handle and at the bottom. Once the screws are out, gently pull the panel away from the door, starting at the bottom and working your way up to disengage the clips, being cautious not to break them. Finally, lift the panel upward to detach it from the door frame.
How to remove the front bumper on a 2003 mazda 6?
626
