0
After unbolting everything and trying to lower it away from the bell housing, you find there is not enough clearance at the crossmember. You must grind/cut away metal from under the transmission to allow it to clear the crossmember.
....
Or what I did: remove the crossmember, put it back later. Mine just bolted onto the frame rails.
What else can I help you with?
What size bolt is used in a Suzuki Samurai transmission?
14 mm
How do you change a Suzuki samurai transmission?
To change a Suzuki Samurai transmission, first, ensure the vehicle is on a level surface and securely lifted. Disconnect the battery, then remove the drive shafts, transfer case, and any electrical connections. Next, unbolt the transmission from the engine and carefully lower it using a transmission jack. Finally, install the new transmission by reversing the removal process, ensuring all connections are secure before testing.
How do you remove front and rear differential gears from a 1986 suzuki samurai?
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ zn
What is the correct transmission fluid to use in a 87' suzuki samurai?
80w90 gear oil
What is the gear ratio for first gear in a suzuki samurai transmission?
'86 Samurai 5 speed transmission 1st gear final reduction ratio from the factory manual is: 3.652
Will a 1987 transmission from a suzuki samurai work in a 1988 samurai?
87 trans will fit 88 but not to sure about 88 1/2 and later models
Where can you find an exploded view of a 1988 suzuki samurai 5 speed transmission?
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/. Complete drawings and photos of all components of the Samurai as well as rebuild information is contained therein. zn
How do you install throw out berring in a 91 suzuki samurai?
The throwout bearing is located in the bell housing of the transmission. You will need to remove the transmission from the engine block in order to access the throwout bearing.I highly recommend all Suzuki Samurai owners download a FREE copy of the factory Suzuki shop manual from the Suzuki Download Archive at http://www.suzukiinfo.com/ Did I mention these are FREE?Another rich resource for Suzuki owners is the Zukikrawlers forum at http://www.zukikrawlers.com/ The good folks that live at this Suzuki site are the world's friendliest and most helpful. Try 'em - you'll want to move there! :-) zn
How do you take off the front seal in a 1988 Suzuki samurai transmission its right behind the throwout baring?
You must remove the t-case and the cradle to reach the transmission. It is super easy to install and remove once the t-case is secured in the cradle. Places the t-case in the correct position.
Where is the transmission filter in a 94 suzuki sidekick?
inside the transmission. visible once you remove the transmission pan
Where do you put gear oil 87 suzuki samurai standard transmission?
To add gear oil to a 1987 Suzuki Samurai's standard transmission, locate the fill plug on the transmission case, which is usually on the side. Use a socket wrench to remove the plug, then pour the appropriate gear oil (typically GL-4) into the fill hole until it reaches the bottom of the plug opening. Reinstall the plug securely after filling. Always consult your owner's manual for specific oil specifications and capacities.
How can you remove transmission on 2004 suzuki forenza?
To remove the transmission from a 2004 Suzuki Forenza, start by disconnecting the battery and draining the transmission fluid. Next, remove the drive axles, exhaust components, and any electrical connections linked to the transmission. Support the transmission with a jack, then unbolt it from the engine and the transmission mount. Finally, carefully slide the transmission out of the engine bay.
