check out this thread. should help http://www.subaruforester.org/vbulletin/f88/cant-remove-glove-box-remove-cabin-filter-37003/
how to remove my glove box
Behind the glove box. You have to remove 7-9 screws & a piece of the paneling to get to it.
how to remove glove box in 1993 camry
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.
To remove the glove box from an S10 pickup, first, open the glove box and remove any contents. Next, locate the screws or bolts securing the glove box hinge and the stops; these are typically found on the sides and bottom of the glove box. Remove these fasteners using a screwdriver or socket wrench, then gently pull the glove box out of its mounting brackets. Be cautious of any wiring or clips attached to the glove box and disconnect them if necessary.
It is very simple. Remove the seven screws holding the glove box. Slide out the box and the filter is easily replaced.
To change the cabin filter in a 2002 Subaru Outback, first locate the filter compartment behind the glove box. Remove the contents of the glove box, then unclip the side stops to allow it to drop down. Take out the old filter and replace it with the new one, ensuring the airflow direction matches the markings on the filter. Reassemble the glove box by reversing the steps.
behind the glove box on the bottom right.
To remove the glove box on a Nissan Xterra, first, open the glove box and locate the two stops on each side. Gently push in the sides of the glove box to release these stops and allow the glove box to drop down. Next, disconnect any electrical connectors if equipped, and remove the screws or bolts securing the glove box to the dashboard. Finally, carefully pull the glove box out to complete the removal.
To change the cabin air filter in a 2010 Subaru Forester, first, locate the filter compartment behind the glove box. Open the glove box and remove the damper arm by gently squeezing its sides, then allow the glove box to drop down. Next, unclip the cover of the filter compartment, remove the old filter, and insert the new one, ensuring it’s oriented correctly. Finally, reassemble the cover and glove box.
To remove the glove box in a Cadillac SRX, first open the glove box and remove any contents. Locate the screws or bolts securing the glove box to the dashboard, typically found on the upper and lower edges. Remove these fasteners using the appropriate tool, then gently pull the glove box out of its hinges. Be cautious of any wiring connected to the glove box light or other components, and disconnect as necessary.
I need to remove my glove box on my 2009 Nissan Murano. Where are the glove box pins located?