To remove the dashboard in a 2003 Acura CL, first disconnect the battery to ensure safety. Remove any trim panels and screws securing the dashboard, including those around the center console and instrument cluster. Carefully detach any wiring harnesses connected to the dashboard components. Finally, lift the dashboard out, taking care not to damage any clips or connectors.
i have an acura cl 2001 what does the ! light on thr dashboard mean
how many quarts for a 2003 acura cl 3.2 type s how many quarts for a 2003 acura cl 3.2 type s
114.3
Under the dashboard above the brake pedal.
To remove the headlamp assembly on a 2003 Acura CL, first, open the hood and locate the headlamp mounting bolts. Remove the bolts using a socket wrench, and then gently pull the headlamp assembly forward. Disconnect the electrical connectors from the back of the assembly and carefully lift it out. Be sure to handle the assembly gently to avoid damaging any components.
The main relay on a 1997 Acura CL is located under the dashboard on the driver's side. Specifically, it can be found near the steering column, mounted to the main fuse box. To access it, you may need to remove the under-dash cover for better visibility.
In a 1997 Acura CL 2.2, the OBD-II port is typically located under the dashboard on the driver's side. You can find it near the steering column, above the brake pedal, or near the fuse box. It may be covered by a small panel or flap that you can easily remove.
Acura CL was created in 1997.
The HVAC blower motor for a 2003 Acura 3.2 CL Type S can be found under the right side of the dash board. It is directly to the left of the passenger side kick panel.
To remove the headlight assembly on a 2003 Acura CL, first, open the hood and locate the headlight mounting bolts, typically found at the top and side of the assembly. Remove these bolts using a socket wrench. Next, disconnect the electrical connector from the back of the headlight, and gently pull the assembly out of its housing. Make sure to handle the assembly carefully to avoid damaging any clips or wiring.
To remove the stock radio from an Acura CL, first, disconnect the negative battery terminal to ensure safety. Then, carefully pry off the trim panel surrounding the radio using a trim removal tool to avoid damaging it. Once the trim is removed, unscrew the mounting screws holding the radio in place, then gently pull the radio out and disconnect the wiring harness and antenna cable from the back. Finally, remove the radio completely from the dashboard.
An Acura CL is a large saloon car made by Honda and first released in 1996. A new model with a squarer shape was released in 2001 but went out of production in 2003.