0
What else can I help you with?
How do you replace the starter on a 1999 Mazda Millenia?
i need a diagram to show me how to remove a starter on millenia s 1999 mazda
How do remove a 1996 Chrysler damper pulley?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
How do you remove powersteering pully on a 1994 s-10 zr2 pickup with 4.3 vortec?
You will need a power steering pulley puller. It is designed to remove and install the power steering pulley. If you attempt to remove the pulley without it you will probably damage the pulley or the pump or both.
How do you determine if you have a bad pulley on a riding lawn mower?
Remove the belt(s) and manipulate the pulley by hand; its action should be butter-smooth.
How can you get more power out of a supercharger?
There are a couple of ways. Changing the pulley size to a smaller supercharger pulley will increase the speed of the supercharger, giving you more boost. You can also go with a larger crank pulley and it will do the same thing. Please keep in mind that when you do this you are adding more air into the engine so you will need to add more fuel. Getting it tuned afterwards will be a great idea. You can also do a thing called "S Porting." This is basically porting out the supercharger and slightly modifing it so that the air flows smoother. Also you can just get it custom tuned. By putting your car on a dyno and having them adjust the air/fuel mixture and timing curves it will result in better performance and more HP Thank you, From www.SuperchargersOnline.com
How do you remove the pulley to remove the power steering pump on a 1992 Chevy blazer s-10?
With a power steering pulley puller. Your local auto parts store should have one you can rent or buy.
Can you put a supercharger on a 2005 Chrysler Crossfire limited convertible?
The 2005 SRT6 crossfire had a supercharger, would need to get injectors, programmer/chipand atleast a pulley to low the boost to a safe level, but would be the best bet. Not too many aftermarket ones avail. due to the low production #'s.
How do you remove the crank pulley in a 2002 jaguar s type 4.0 v8?
To remove the crank pulley on a 2002 Jaguar S-Type 4.0 V8, first, ensure the vehicle is securely raised and supported. Remove any accessories, such as the serpentine belt and any front covers obstructing access. Use a socket wrench to remove the crankshaft pulley bolt, which may require a long breaker bar for leverage. Once the bolt is removed, gently pull the crank pulley off the crankshaft using a pulley puller if needed.
What liter engine is in Mazda millenia 2001?
The millenia P - has 2.5 liter engine, The Millenia S has a 2.3 liter engine
In which direction do you turn the nut on the fan to remove it from the pulley on a 99 S-10?
Looking at the fan from the front you would turn it counter clock wise to remove it. You will probably need to hold the pulley from turning also.
What model Mazda replaced the Millenia?
There was no replacement for the Millenia. Too bad as it makes me keep my now 11 year old Millenia S.
How does the belts go on a 1996 mazada millenia s?
how does the belts go on a 1996 Mazda millenia
