0
To remove the A/C compressor from a 1999 Isuzu Rodeo, first, ensure the vehicle is off and the battery is disconnected. Then, discharge the A/C system properly to remove any refrigerant. Next, remove the serpentine belt from the compressor, disconnect the electrical connector, and unbolt the compressor from its mounting brackets. Finally, detach the refrigerant lines and carefully remove the compressor from the engine bay.
What else can I help you with?
Why 99 rodeo ac compressor does not work?
one reason maybe that your low on freon
1999 Isuzu Rodeo?
I have a '98 4wd V6 Rodeo and average 17 mpg.
How do you get the belt tensioner off 99 rodeo?
You need an 8mm hex socket and a 12mm socket. Remove the belt 14mm socket on the tensioner...Then remove the 8mm and 12 mmm bolts and it comes off
What kind of brake fluid does a 99 Isuzu rodeo use?
DOT 3
Torque spec cam pulleys 99 Isuzu rodeo 2.2l?
selam
Do know the size of the shorter belt on a 99 caravan with a 3.3 that bypass the ac?
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
The compressor on your 99 Dodge Neon is locking down Do you need to replace the compressor or is there another option besides being hot?
REPLACE THE COMPRESSOR If the AC compressor is seized, you don't have many options. Yes, you
Your 99 Isuzu Rodeo is leaking fuel. how do you fix it?
First find where the 99 Rodeo is leaking fuel from. Check for loose or cracked fuel lines. The leak needs to be found before driving the vehicle, as the leak could cause a fire.
Can you by pass ac by using smaller serpentine belt for 99 Isuzu rodeo?
We think so.
How do i jump start the air conditioning compressor in a 99 cadillac?
DISCONECT THE BATTERIE CABLE FOR 10 MINUTES ,AFTER YOU RECONNECT THE BATTERI YOU CAN CHARGE THE AC. COMPRESSOR
Where is the onboard compressor located on 99 grand marquis?
It is usually under the air filter.
99 cavalier tensioner removal?
On the 2.4L engine,Remove the belt,remove the Altenator,take out the 1 bolt holding it to the block. take off the 2 bolts holding the top of the a/c compressor to the tentioner.Lift and wiggle it strait up. "poof" It's off.
