answersLogoWhite

0

To remove the back seat on a 1999 Acura RL, start by locating the seat release mechanism, which is usually found at the bottom or rear of the seat cushions. Pull the release levers or push down on the clips to detach the bottom cushion from its mounting points. Once the bottom cushion is removed, you can access the rear seat back, which is typically secured with bolts or clips. Remove these fasteners and gently pull the seat back away from the vehicle to complete the removal.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

How do you remove the back seat to your 1999 Acura 3.0 CL?

Push and lift to release the two retaining clips located on the front bottom edge of the seat. Remove the 10mm bolt retaining the center rear of the seat.


Where is the fuel pump located on 1999 Acura RL?

It is located between the back seat and the spare tire hole remove 4 screws for the cover plate and your there .


How do you remove the back seat from a 1993 Acura Legend?

Remove the four bolts on the bottom of the seat back and the 2 bolts on each headrest. Take out the headrests. Lift straight up.


Can you show picture on how to remove the rear back seat 1999 Mercury sable?

How can remove the rear seat on a 1990 mercury sable


How do you remove the back seat from a 1999 Dodge Intrepid?

well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.


How do you get into the trunk of a 1999 Buick centry without a key?

Remove the back seat.


How do you take the front seat out of a 1999 Chevy truck?

If it is the new body style 1999 truck, you will need a 15 and an 18 socket. Slide the seat all the way forward to remove the back bolts, slide the seat all the way back to remove the front bolts , unplug the seat belt sensor and lift the seat out.


How do you remove the front seat of a 1992 Acura Legend?

There should be four bolts under the seat, move the seat all the way back then take the front two out than move it all the way forward and remove the back two, after that unhook any wires there are connected


Where is the fuel pump relay located on a 98 Acura RL?

The fuel relay is located in the back of the rear seat. Open the Trunk, remove the cover from the trunk the cover the back of the seat. and there is your trunk relay.


How do you remove the back seats from a 1994 Acura Integra gsr?

The back seats on a 1994 Acura Integra are mounted on bracket that attach to the body of the vehicle. Push the back of the seat down and loosen all the bracket bolts. Pull the seats out.


Is the fuel pump on a 1999 Escort zx2 accessible under the back seat or does tank need to be dropped?

The back seat removes. Under the right and left seat there are buttons you push and the seat should remove.


Where do you find the plug for the obdII on a 1999 Acura TL?

The OBDII plug (male) in a 1999 Acura TL is located under the radio near the seat heater switches. It is behind a small plastic cover that you remove by reaching over the top and giving a gentle pull.