Out the bottom of the engine compartment. Here's a link to a series of engine removal pictures:
http://www.lovehorsepower.com/images/MR2_EngineRemoval/Removal/Thumbnails.html
Through the bottom
yes but depends if you are keeping fuel injection system of mr2 or the one of the Camry
Ask Kody olsand
According to the Gates website ( they make timing belts etc. ) the 2.0 liter and the 2.2 liter in a 1992 Toyota MR2 are NON interference engines
Yes.
The number is on the block and isjust above where the gearbox connects to the block
The crankshaft position sensor on a 1992 Toyota MR2 is typically located on the engine block, near the bottom of the engine, close to the flywheel. It is positioned to read the crankshaft's position and speed. To access it, you may need to remove some components, as it's often tucked away in a tight space. Always refer to a repair manual for detailed instructions specific to your model.
Can you put a 3.0 engine in an 86 mr2
To remove the motor from a 1991 Toyota MR2, first disconnect the battery and drain the fluids. Next, remove the engine cover and disconnect all electrical connections, fuel lines, and any other components connected to the engine, including the exhaust system. Then, support the engine with a hoist or engine stand, and unbolt it from the transmission and engine mounts. Finally, lift the engine out carefully, ensuring all connections are detached.
154
Yes, you can install a supercharger on a 1992 Toyota MR2, though it requires some custom work and compatibility considerations. The 1992 MR2, particularly the SW20 model, originally came with a naturally aspirated engine or a turbocharged version, so adding a supercharger would involve modifications to the intake, exhaust, and possibly the fuel system. It's essential to ensure that the engine can handle the additional boost and to tune it properly for optimal performance. Additionally, sourcing a compatible supercharger kit or parts may require some research and possibly fabrication.
you just don't ?