answersLogoWhite

0

You would need to first open hood ,then look behind the Head light assembly there will be in the center of the head light housing a rubber insulating cap very soft ,there will be the light bulb wire and connector in the center of this rubber cap. You would need to wiggle the light bulb connector back and fourth and (side to side) all while pulling on the connector .Once released you will peal back the rubber cap (there is a tap )grasp the tab and pull off the cap there will be a wire clip that if you press in you will release the bulb ! Once released remove bulb.When installing new BULB do-not TOUCH THE BULB!!!handle it with a pair of latex gloves ,installation of bulb is the reverse procedure of removal ! hope this was helpful!

Lino Jr.

User Avatar

Wiki User

15y ago

What else can I help you with?