answersLogoWhite

0

Right where the rear glass window latches to the tail gate, there are two screws to remove. The rest of the cover is held to the tail gate with expanding plastic anchors, just pry the cover away until they pop out, one a time.

The wiper motor can be checked by testing for continuity through the windings. More than likely your problem is not the motor but rather the relays that control the wipers.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you open tailgate window of an Isuzu wizard?

How do you replace the tailgate lock on a isuzu wizard 1999


How do you open the tailgate from the inside on an Isuzu Rodeo?

You can't unless it has a remote trunk popper on the unlock remote. I had the same problem and went to an Isuzu dealer for a new key and remote.


Where is the jack in a 1996 Isuzu Rodeo?

The jack is in the left rear corner. Open the tailgate and remove the cover on the inside panel. The hardware is under the passenger rear seat bottom. Lift the seat forward and it's clipped to the bottom of the seat.


How do you remove headlamps on 2012 Isuzu D max?

how to remove the headlamp on 2012 isuzu d-max


How to open the back of an Isuzu Rodeo?

It is really easy. First take off the tailgate and the glass lift hatch. Then you are done.


How do you remove the ignition switch in a 1988 Isuzu pickup?

how to remove lock cyliner switch 1988 Isuzu pickup


How do you change brake lights of a 1999 Isuzu amigo?

To change the brake lights on a 1999 Isuzu Amigo, first, open the tailgate and locate the screws securing the taillight assembly. Remove these screws and gently pull the assembly away from the vehicle. Disconnect the wiring harness, then twist the bulb socket counterclockwise to remove the old bulb. Replace it with a new one, reconnect the wiring, and reassemble the taillight.


Where is the transfer box for tail light for 2005 Isuzu Ascender?

The transfer box for the tail light on a 2005 Isuzu Ascender is typically located in the rear of the vehicle, near the tailgate area. You may need to remove the interior trim or access panel in the rear to reach it. Always refer to the vehicle's service manual for specific instructions and diagrams for your model.


How do you remove rear turn signal bulb Isuzu pickup?

To remove the rear turn signal bulb from an Isuzu pickup, first, open the tailgate and locate the access panel or the rear light assembly. Depending on the model, you may need to unscrew or unclip the assembly to expose the bulb holder. Twist the bulb socket counterclockwise to remove it, and then pull the old bulb straight out. Replace it with a new bulb, reinsert the socket, and secure the light assembly back in place.


How do you remove the interior door panel on a 2004 Isuzu ascender?

How do you remove the interior rear door panel on a 2004 isuzu ascender?


How do you remove the spare tire on 1991 Isuzu pick up pup?

how to remove spare tire 1990 Isuzu Pick Up


How to remove cv axle on 97 Isuzu rodeo?

hoew do you remove a c v axle from a 97 isuzu rodeo front right