If they are anything like the ones on my 07 Santa Fe ,they have a little cut out at one spot on the edge and you just pry them out with a little flat blade screwdriver. Even without the pry spot I'd still go that way. Be GENTLE!!. Also, sometimes they are made out of soft rubber and will bounce off to never, never land so try not to drop it.
To remove the passenger door panel on a 2004 Hyundai Tiburon, start by disconnecting the negative battery terminal for safety. Next, remove any screws that are securing the panel, typically located in the armrest and behind plastic covers. Carefully pry off the panel using a flathead screwdriver or a panel removal tool, making sure to detach any electrical connectors for windows or locks. Finally, lift the panel upwards to free it from the door.
If you want to just replace the speakers: Remove window crank ( if present ), remove door panel screws. There are several plastic retainers holding the panel to the door. Gently pry the panel from the door at the sides and bottom, then pull the panel up and over the window lip. The covers are "plastic welded" to the panel. Cut the "welds" and pry off the cover.
To remove the inner door panel of a 2006 Hyundai Sonata, start by disconnecting the negative battery cable to ensure safety. Use a flathead screwdriver to carefully pry off any plastic covers concealing screws, then remove the screws securing the panel. Next, gently pull the panel away from the door, starting at the bottom and working your way up to release any clips. Finally, disconnect any electrical connectors, and you’ll have access to the outer handle for repairs.
rear door panel ,how to open.
A door panel on a 2005 Hyundai Accent is mounted with screws and clips. Loosen all the mounting screws. Pull the panel outward and pop out the clips. Remove the door panel.
To remove the inner door panel on a Hyundai i30 with the door shut, first, locate and remove any visible screws, typically found near the door handle and along the edges. Use a flathead screwdriver to gently pry off any plastic covers concealing screws or clips. Next, carefully slide a trim removal tool around the edges to disengage the clips holding the panel in place. Once loose, lift the panel upwards to detach it from the door frame, being cautious of any wiring connections that may need to be unplugged.
A door panel on a Hyundai is secured with several screws. Loosen and remove and the screws then proceed to gently pull the panel outward. There are several clips for extra support. Pull the panel outward and the clips will come off as well.
remove the dash board panel around it and take it out
Remove the plastic cover first, but be careful as it is on quite tight and could split easily. The radio mounting panel has four screws that you will need to remove. After that, just slide the radio out and disconnect it.
first, remove the door handle on the top. Two screws, phillips, on both ends, under the plastic covers. Then remove the plastic covering the door lock. second, remove the window switch panel by lifting it using a flat edge, and disconnecy cables. third, lift the door panel from the bottom, up. The door panel should come off.
There are several philips-head screws to remove around the bottom and back, then it is mostly a matter of pulling firmly without breaking the (plastic) panel. To completely remove the panel, you will have to unscrew and remove the "pocket" in the armrest and the door-opening lever.Stocker @ http://www.rdtiburon.com/David @ http://votefordavid.blogspot.com
How do you remove front door Panel on Hyundai Excel 1999 to Rplace front door SPEAKER'S