you are suppossed to use Honda atf you will need about 6-9 qts take drain plug out and drain fluid about 2 or 3 qts come out at a time refill trans about 3 qts start engine let run about 3 minutes . drain again refill and run again .drain and refill again and the job is finished you cannot change filter it is inside trans the filter gets replaced when trans is rebuilt
Replace transmission fluid
It indicates transmissions problems. Had this happen at 103,000 km on our 2002 Honday Odyssey and had to replace the entire transmission.
In a 2000 Honda Odyssey, the transmission speed sensor is located on the transmission itself, typically on the driver's side. It is mounted near the transmission fluid pan and can be accessed from underneath the vehicle. To replace or inspect it, you'll often need to raise the vehicle for better access.
A means replace engine oil. 1 means rotate tires. 3 means replace transmission oil.
It may mean a scheduled maintenance is required, which at the minimum is an oil change. However, it can also mean more intensive maintenance is required, such as coolant flush/replace, transmission flush/replace, brake flush/replace, a tuneup (replace hoses, spark plugs, etc.).
This is commonly a problem with the transmission filter or fluid. Replace the transmission fluid or have your transmission filter taken in for maintenance.
how do you replace a 2000 handa odyssey radiator
According to Honda, no, it is a lifetime fluid. My advice is to change it every 75,000 miles.
You can find good information on Honday Odyssey maintenance in the OdyClub forum at http://www.odyclub.com/forums/showthread.php?threadid=31713 There is a good description with pictures of how to change rear brake pads on the 2001 Odyssey. Good luck! SP
replace rack and pinion on 2008 honda odyssey
We paid $4000 installed for tranny that came with a 3 year warranty. Used the warranty about two weeks later when a solenoid that came with the transmission was bad.
It is in Odyssey manual page 324 (Maintenance minder). Under code B many things have to be checked including brakes, tires, tire rod ends etc. code 2 is to replace filters and 4 is to replace spark plugs and timing belt.