To replace the heater control valve in a 1996 Lexus LS400, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the radiator, then locate the heater control valve, which is typically found near the firewall on the passenger side. Disconnect the hoses connected to the valve and remove the mounting bolts to take out the old valve. Install the new valve by reversing the process, ensuring all connections are secure, and refill the coolant before reconnecting the battery.
In order to change the heater core on an 90 ls400 you have to remove the entire dash pad and cross bar to be able to remove the heater core box. This is a job for and experienced LEXUS technician www.lextechautomotivellc.com
1991 Lexus ls400 hard steering at ilde rack &pump have been replace all screencleaned or removed.
location of the ecu on 1993 Lexus LS400
The 1991 Lexus ls400 has a timing belt.
How and were do i get the kit to put in my reare windpw to an 1990lexus ls 400
Where is the camshaft position sensor located on 1990 Lexus ls400?
sorry I'm not sure how
To change the idle control on a Lexus LS400, first locate the idle air control valve (IACV), typically found near the throttle body. Disconnect the electrical connector and remove the mounting screws securing the IACV. Replace it with a new valve, ensuring a proper seal, and reconnect the electrical connector. Finally, reset the engine's idle by allowing it to reach operating temperature and checking for any error codes.
LS400 fuel tank is metal.
The minimum rear brake rotor thickness on a 1996 Lexus LS400 is 15mm.
I did a Google search and the 1994 Lexus LS400 has a ( 22.5 U.S. gallon ) gas tank
The fuel capacity for a Lexus LS400 is 22.5-gallons. The low fuel light comes on when there are around 2-gallons of fuel left in the tank. The Lexus LS400 gets around 24-mpg on the open highway.