answersLogoWhite

0

if it is the v6 2.8 litre, you crawl under the dirvers side right behind the front wheel, as the starter is on the bottom drivers side of the bell housing. disconnect the battery, take the 3 lines off of the starter and then remove the 3 retaining bolts. pull starter out just a little then straight down. you wont be able to rotate it to get it out, as i spent over an hour with 30 pounds in my hands trying to get it out, let alone in. so save yourself some troubles. putting it back in is a little more complicated, on the sole fact that you will more than likely have to shim it. install it, try and start it. if it makes a loud sound, probly needs to be shimmed. or you could pay someone to do it for you since your asking on here?

dunlap

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

1990 Isuzu trooper 2.8 timing chain marks?

how do i line up timing gears on 2.8 isuzu trooper


What other vehicles have the same egine starter as a 1990 Isuzu trooper 2.8 ltr 4x4 automatic?

89-94 chevy blazer with 2.8


How many gallons will a Isuzu trooper fuel tank hold?

My 1990 Isuzu Trooper II holds 20.5 US gallons.


How many gallons will Isuzu trooper fuel tank hold?

My 1990 Isuzu Trooper II holds 20.5 US gallons.


Why does the 1990 Isuzu trooper fan blade break?

it is plastic


Where is the fuel pump on a 1990 Isuzu trooper?

It is in the fuel tank.


After how many miles do you check cam belt on Isuzu trooper?

You don't check it you replace it. 1990-97 Replace at 60,000 miles 1998 Replace at 75,000 miles 1999 up Replace at 100,000 miles


What is the stock tire size on a 1990 Isuzu Trooper II?

There are several stock tire sizes for the 1990 Isuzu Trooper II. In order to determine the tire size, look at the markings on the sidewall of your current tires.


Where is the ffuel pump cut-off switch located on a 1990 Isuzu Trooper?

There isn't one on that year trooper.


What are the instructions for replacing a starter in a 1990 Isuzu pickup?

To replace the starter in a 1990 Isuzu pickup, first disconnect the negative battery cable to ensure safety. Remove the starter wiring harness and the two mounting bolts securing the starter to the engine. Carefully pull out the old starter and replace it with the new one, reattaching the mounting bolts and wiring harness. Finally, reconnect the negative battery cable and test the starter to ensure proper operation.


How do you fix a fuel pump on a 1990 Isuzu trooper?

you don't, buy a new one


Can you check transmission fluid on Isuzu trooper 1990?

if it is an automatic then yes, if it is a standard transmission then no