0
To replace the brake light on a 2002 Lexus LX470, first, open the rear hatch and locate the tail light assembly. Remove the screws or bolts securing the tail light, then gently pull the assembly out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring harness, and reattach the tail light assembly with screws or bolts.
What else can I help you with?
How do you reset the oil change light on a Lexus LX470?
fuc you
Cancel timing belt light on Lexus lx470?
probably have to have a Lexus dealer turn it off
What is Toyotas equivalent to Lexus lx470?
Land Cruiser
What problems with Transmission on 2001 Lexus lx470?
No shift at all
How do you replace bulb on Lexus lx470 running boards?
To replace the bulb on the running boards of a Lexus LX470, first, ensure the vehicle is turned off and parked on a flat surface. Carefully remove the plastic cover or lens on the running board by unscrewing or unclipping it, depending on your model. Replace the burnt-out bulb with a new one, making sure it fits securely, then reattach the cover or lens. Finally, test the lights to ensure they are functioning properly.
How much engine oil does Lexus lx470 needs?
7 qts of 5w30.
How do you replace a front turn signal light on 1999 Lexus lx470?
1999 Lexus LX470 turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
What is the Lexus Lx470 transmission fluid type and capacity?
The Lexus LX 470 uses any SAE certified transmission fluid. The capacity of the transmission is 12 quarts of transmission fluid.
Where is the location of crankshaft sensor on 2000 Lexus LX470?
The crankshaft sensor for this model is located at the front of the engine, near the crankshaft itself.
Lexus lx470 How do you turn on etc pwr?
To turn on the ETC (Electronic Throttle Control) Power in a Lexus LX470, first ensure the vehicle is in the "ON" position without starting the engine. Then, locate the ETC Power button, which is usually found near the gear shift or on the dashboard. Press the button to activate the system; if the indicator light illuminates, it confirms that ETC Power is enabled. Always refer to your owner's manual for specific instructions related to your model year.
Can the 1999 Lexus LX470 be flat towed?
The 1999 Lexus LX470 is not recommended for flat towing. Flat towing can cause damage to the vehicle's transmission and drivetrain. If you need to tow it, it's better to use a trailer or a dolly that lifts the front wheels off the ground. Always consult the owner's manual or a professional for specific towing guidelines.
How much engine oil does the 1999 Lexus lx470 need?
The 1999 Lexus LX470 requires approximately 6.5 quarts (or about 6.2 liters) of engine oil when equipped with a new oil filter. It's essential to check the owner's manual for specific recommendations and guidelines for oil type and maintenance. Always ensure the vehicle is on a level surface when checking or adding oil.
