To replace the door speakers on a 2005 Acura TL, start by removing the door panel. Use a flathead screwdriver to carefully pry off the panel’s clips and screws, then gently pull it away from the door. Disconnect the speaker harness and remove the old speaker by unscrewing it from the mounting brackets. Install the new speaker by securing it in place, reconnecting the harness, and reattaching the door panel.
you have to remove the door panel
3.5"-4" in the dash and 6"-6.5" in the front door. To remove factory door speakers, you will have to drill out the rivets. To replace door speakers, you will have to fabricate a spacer ring or find one to purchase (door is very shallow).
what size door speakers are in a 2005 Chevy Malibu classic
The door speakers are 5.25 inches but you have to purchase an insert in order to replace the door speakers.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
The 2005 Nissan Altima has door speakers that are 6.5 inches. If you are replacing your speakers, you can also use a 5.5-inch size.
The door panel speakers in a 2005 Toyota Corolla are 6.5 inches. These speakers have a mounting depth of 3 inches.
The 2000 Acura Integra dashboard speakers measure 3.5 inches in diameter. The front door speakers measure 5.5 inches in diameter. The rear speakers measure 7.5 inches in diameter.
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
To replace the speakers in a 2001 Acura MDX, first, remove the door panels by unscrewing any visible screws and gently prying off clips. Disconnect the wiring harness from the old speakers and remove them from the mounting brackets. Install the new speakers by connecting the wiring harness, securing them in place, and reattaching the door panels. Finally, test the speakers to ensure they're functioning properly before reassembling everything.
6x8
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.