To replace the gear shifter cable on a 2003 Hyundai Tiburon, first, disconnect the negative battery terminal for safety. Remove the center console to access the shifter assembly, then detach the old cable from the shifter and the transmission. Install the new cable by securing it to the shifter and reconnecting it at the transmission, ensuring proper alignment. Finally, reassemble the center console and reconnect the battery.
The cost to replace a 2003 Hyundai Tiburon ranges from $70 to $110. This is dependent on the store and part brand.
how to remove trans shifter cable ball socket from shifter ball
its the cable attached to the stock intake.
visit www.newtiburon.com for step by step
You should just unscrew it off the shifter. It might be on there tight, but it should just screw off. I put the stock shifter knob on my B&M short throw shifter
The 2003 Hyundai Tiburon has door handles that sometimes break or need replaced. They can be easily removed and replaced with a new part.
video on how to replace parking brake cable in ford escape 2003
To repair the automatic shifter in a 2003 Jeep Wrangler, first, ensure the vehicle is in park and the battery is disconnected for safety. Inspect the shifter assembly for any visible damage or loose connections, focusing on the cable linkage and the mounting brackets. If the issue is with the shifter's internal components, you may need to disassemble it to replace worn parts. Finally, reassemble everything, reconnect the battery, and test the shifter functionality before driving.
Approx $550 from a Hyundai dealership.
It is on the side of the transmission were the shifter cable hooks to the trans. That will be the NS switch.
It is on the side of the transmission where the shifter cable bolts to. It is built into the neutral safety switch.
the starter is located on the intake part of the block in the center of the engine compartment. from the driver side look for the shifter cables on top of the trans axle and it is straight back from there.