answersLogoWhite

0

On either side opf the car, there is a spring type wire that holds the bulb in place,(it is located under the rubber boot) undo the wire clip and the bulb assembly will fall out, or you may need to pull slightly. Be sure to bring the old bulb with you unless you are buying OEM parts(from Lexus parts). Many auto parts stores list the bulb as one that has a 90 degree bend where the plug is, but on my Lexus, it is a straight bulb.

this procedure is correct, but first see if you can unplug the bulb from the harness, it is a dual connection, (harness to the socket-socket to the bulb), had me fooled for a minute but came to this answer and was great info.

Also, this may seem obvious to some, the boot pulls off! I tried to work around it for an hour before it came off in my hands. Then it was cake! So, pull off the connector, grab the tabs on the boot and pull it loose, pull the boot off the connector, then unhook the spring and pull the lamp/connector out.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace headlight for 1999 Lexus es 300?

Remove the retaining screws from the headlight assembly. Remove the wiring harness from the back of the headlight. The headlight will come out. Reverse the process to install the new headlight.


How do you replace the headlight bulb on a 2002 Lexus is 300?

To replace the headlight bulb on a 2002 Lexus IS 300, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; remove the rubber dust cover by twisting it counterclockwise. Disconnect the electrical connector from the bulb, then release the bulb by turning it counterclockwise. Insert the new bulb, reconnect the electrical connector, and replace the rubber cover to complete the installation.


How do you replace the front turn signal bulb located on a 1998 Lexus ES 300?

To replace the front turn signal bulb on a 1998 Lexus ES 300, first, open the hood and locate the back of the headlight assembly. Remove the bulb socket by twisting it counterclockwise, then gently pull it out. Replace the old bulb with a new one, ensuring it is securely in place, and reinsert the socket into the assembly, twisting it clockwise to lock it in. Finally, test the turn signal to ensure it is functioning properly.


Alternator installation Lexus?

How much is it to replace an alternator for a Lexus IS 300


Can rims from a 1998 Toyota Camry fit on a 1994 Lexus GS 300?

No, rims from a 1998 Toyota Camry will not fit on a Lexus GS 300. Rims are not interchangeable from a Toyota to a Lexus at all.


How do you Replace front seal 94 Lexus and a diagram?

How do you Replace the timing bealt of lexus es 300 92 and a diagram?


Lexus IS 300 trunk brake light how to replace?

Follow the link below, labeled "How to replace a Lexus IS300 tail light"


How do your replace tag light bulbs on a 1994 Lexus es 300?

no you do not


When do you replace timing belt on 97 Lexus es 300?

100k


How many quarts of oil for a 1998 Lexus gs 300?

Lexus dealers call for 6.1 but 6 will be fine


How do you replace a turn signal bulb on a 1995 Lexus ES 300?

I don't know about 95, but on the 94, you have to take out the whole light assembly from the front. Take off the cover inside the hood from the top, expose the headlight bolts, remove the headlight. Good lucK!


How do you replace the expansion valve on a 99 Lexus gs?

How do you replace evpansion valve on 99 gs 300