1- Pry up the grill by inserting the edge of a panel tool under the corner and prying up.
2- Remove the Phillips screws holding the speaker in place. Remove the speaker and unplug the connector on the back.
3- Plug the new speaker in, place it in the door and screw it into place. Place the grill back onto the speaker opening and press firmly downwards to seat it in place.
You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.
Positive+ (RED) goes to positive + on battery. Negative - (Black) goes to negative - on battery.
I just bought a 96 Honda accord lx and I want to replace the speakers/everything but this is my first car and I'm not sure which speakers are good...
Remove the negative and then positive cables from the battery.
2006 Accord Coupe: Front doors - 6.5" speakers, Rear deck - 6"x9" speakers
How do you replace the clock on accord 1992
The 1993 Honda accord rear speakers measure seven inches by five inches. The front speakers measure four inches by four inches.
The 1995 Honda Accord LX typically comes equipped with 6.5-inch speakers in the front doors and 6x9-inch speakers in the rear deck. If you're looking to replace or upgrade them, it's important to check for compatibility with the specific model and any aftermarket options. Additionally, ensure that the mounting depth and power handling match your audio preferences.
i wana change speaker for 2003 Honda accord
To replace the door speakers on a 2002 Honda Accord EX, first, remove the door panel by unscrewing the screws and gently prying off the panel clips. Disconnect the speaker wires and remove the old speaker by unscrewing it from the door. Install the new speaker by securing it with screws, reconnecting the wires, and then reattach the door panel, ensuring everything is aligned and secured properly. Finally, test the new speakers to ensure they are functioning correctly.
Do pioneer 3way 6x9 speakers fit in the rear doors of a 2002 accord coupe?
if you can get to the speakers the re should be some bolts that you need to take out. Then you should be able to lift the speaker up and unplug the wires. then carefully plug in the new ones, and screw the bots back in.