0
Hi, Perhaps I can answer part of the Question with the 3Litre V6(front cylinders only) Remove the plastic engine cover by undoing the 3 securing nuts, this will expose the spark plug leads and extension caps, disconnect the spark plug lead by pressing the small plastic plate where the lead enters and slide it out,undo the small cap retaining bolt and remove the lead extension. The plug is located at the bottom of the hole Gently remove using correct socket and extension bar and replace as neccessary. I cannot help with the rear cylinder plugs looks like the intake manifild would have to be removed to get to them Lew
Probably that's true. My wife just had the plugs changed at a Roseville, Calif. Mazda dealer (was suggested as part of 100Kmi servicing) and was surprised that the bill for plug change only was $451 (on March 24, 2009). Was $6 per plug, $6 per gasket, and $378 for the labor. Must be a heck of a job!!!!
Sam I just completed replacing the plugs and boots in a 2004 Tribute 3.0. I removed the intake cover - actually pretty easy. the challenge is in determining what else needs to be loosened / disconnected. I disconnected two wiring blocks on the back left, 3 hoses on the back, 2 black screws on component on the back right, 2 silver screws on a component on the back right and another hose on the right. At that point, I could move the intake so that I could access the back 3 plugs and boots. You will need a couple of socket extensions - I used a 6 and 10 in. This was the first time working on the truck and it took me 2 hours. It is doable with some patience and the right tools. btw - you should use anti-sieze on the plugs and dialectric grease on the boots. Good Luck. Rick
What else can I help you with?
Where are the spark plugs located in a 2002 Mazda Tribute?
Screwed into the cylinder head.
How do you replace spark plugs 2005 Mazda Tribute V6?
To replace the spark plugs in a 2005 Mazda Tribute V6, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coils by unscrewing them and carefully pulling them out to access the spark plugs. Use a spark plug socket and ratchet to remove the old plugs, then install the new ones with the correct gap, tightening them to the manufacturer's specifications. Finally, reattach the ignition coils and reconnect the battery terminal.
Where can you find a Diagram from the number location of the spark plugs -- Mazda MPV 2003?
need to replace all my spark plugs on my Mazda mpv 2003 please help me.
How do you change spark plug on a mazda tribute 2004?
Disconnect the battery, remove the intake manifold, remove the spark plug boot covers and cables, and remove the old spark plugs. Put in the new spark plugs, attach the spark plug boot covers and cables, replace the intake manifold and connect the battery.
What is the spark plug gap for a Mazda Tribute 2004 V6 2WD?
what is spark plug for mazda tribute 2004
How many plugs in a 2001 Mazda tribute?
A 2001 Mazda Tribute typically has six spark plugs, as it is equipped with a V6 engine. Each cylinder in a V6 engine requires one spark plug, so there are a total of six for this model. If it has a 4-cylinder engine, it would have four spark plugs instead. Always refer to the owner's manual or consult a mechanic for specific information on your vehicle.
How often are spark plugs to be change on a Mazda tribute v6 2004?
For a 2004 Mazda Tribute with a V6 engine, spark plugs should typically be changed every 60,000 to 100,000 miles, depending on driving conditions and the type of spark plugs used. It's important to consult the owner's manual for specific recommendations related to your vehicle. Regular maintenance helps ensure optimal engine performance and fuel efficiency.
How many spark plugs are in a 94 Mazda mx-6?
there is six spark plugs
How do you change glow plugs Mazda 5?
The Mazda 5 does not have glow plugs. Maybe you meant spark plugs?
How often should i Replace Mazda 5 spark plugs?
The owners manual says every 75,000 miles
How do you replace the spark plugs on a Mazda 6 4-cylinder?
To replace the spark plugs on a Mazda 6 4-cylinder, first, ensure the engine is off and cool. Remove the engine cover if applicable, then locate the spark plug wires or coils and disconnect them. Use a socket wrench with a spark plug socket to carefully remove the old spark plugs, checking for any debris. Install the new spark plugs by hand to avoid cross-threading, then tighten them to the manufacturer's torque specifications before reattaching the wires or coils.
How do you replace the sparkplugs for a 2002 Mazda mpv?
To replace the spark plugs on a 2002 Mazda MPV, start by locating the spark plug wires and carefully disconnect them. Remove the ignition coils or any covers that may be obstructing access to the spark plugs. Use a spark plug socket and ratchet to unscrew the old plugs, then install the new plugs by hand to avoid cross-threading, followed by tightening them to the manufacturer's specifications. Finally, reconnect the ignition coils and spark plug wires.
