To replace the dash lights on a 1992 Miata, start by removing the dashboard cover by unscrewing the necessary screws and gently prying it off. Once the cover is removed, locate the gauge cluster and unscrew it to access the light bulbs. Carefully twist and remove the old bulbs and replace them with new ones, ensuring they are properly seated. Reassemble the gauge cluster and dashboard cover, and test the lights to ensure they work.
where are the dash bolts located to replace burnt dash lights
Check the fuse it might be blown,if so replace with same type fuse
How do you replace the dash lights on a 2004 Nissan Quest
You need to remove the dash in order to get back there to replace any blown bulbs.
under the dash behind the steering column
replacing dash board lights
To access the dash lights on a 1994 Mazda Miata, you need to remove the instrument panel. Start by disconnecting the negative battery terminal for safety. Then, remove the screws securing the trim around the dashboard and gently pry it off. After that, you can unscrew the instrument cluster and pull it out to access the bulbs for the dash lights.
You will need to check the ground wires. A loose ground wire can cause the lights to work sometimes and sometimes not to work.
replace fuse
most likely a blown fuse, replace, if it blows again you have a short, if you have a trailer connection look there first
How do I replace the dash panel lights on a 2001 toyota sequoia?
To replace dash lights on a Mazda B 3000 first disconnect the battery and remove the dashboard. Unplug the cluster wiring and carefully remove the display. Replace the lights.