Hello there,
Replacing the front struts on a '05 Lexus GX470 is a relatively intensive procedure that takes about 2-4 hours to perform. Here it is a write-up on replacing the front struts on a GX470:
1. Before servicing the vehicle, refer to the precautions section.
2. Remove the wheel.
3. Remove the stabilizer bar.
4. Remove the clamps and connector.
5. Remove the wire bracket.
6. Remove the lower strut bolt.
7. Remove the 3 upper strut nuts.
8. Remove the strut.
9. Installation is the reverse of removal. Do not fully tighten the lower strut bolt until the vehicle is resting on the ground and the suspension has been jounced a few times. Observe the following torques:
§ Upper nuts: 47 ft. lbs. (64 Nm)
§ Bracket nut: 11 ft. lbs. (15 Nm)
§ Stabilizer bar links: 52 ft. lbs. (70 Nm)
§ Wheel: 83 ft. lbs. (112 Nm)
§ Lower strut bolt: 100 ft. lbs. (135 Nm)
how to remove rear struts on 2005 chevy cobalt
Front struts. Rear shocks.
2005 Chevy Malibu, shocks in rear, Struts in front.
To replace the front struts on a 2005 Mazda 3, start by safely lifting the vehicle and removing the front wheels. Disconnect the strut assembly from the steering knuckle, and remove any bolts securing the strut to the vehicle frame. Next, remove the top strut mount bolts from the engine bay, then carefully take out the strut assembly. Install the new struts by reversing the steps, ensuring all bolts are torqued to the manufacturer's specifications.
Struts all the way around.
Yes
To replace the struts on a 2005 Volvo S40, begin by safely lifting the vehicle and removing the front wheels. Next, detach the strut assembly by unbolting it from the steering knuckle and the top mount inside the engine bay. Replace the old strut with a new one, ensuring all bolts are torqued to specifications, then reassemble the components. Finally, reinstall the wheels and lower the vehicle to perform a wheel alignment.
I paid $900 for shocks/struts and bushings. I was told that was the "brother in law" discount.
To replace the struts on a 2005 Dodge Magnum, start by safely lifting the vehicle and removing the front wheels. Next, disconnect the sway bar link and the lower control arm from the strut assembly, then unbolt the strut from the top mount under the hood. Install the new struts by reversing the removal process, ensuring all bolts are torqued to the manufacturer's specifications before reattaching the wheels and lowering the car. Always consider having a professional align the wheels after replacing struts to ensure proper handling.
To replace the struts on a 2005 Chevy Venture, start by safely lifting the vehicle and removing the front wheels. Disconnect the strut assembly by removing the bolts that secure it to the steering knuckle and the top strut mount under the hood. Replace the old strut with the new one, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reassemble the wheels, lower the vehicle, and perform a wheel alignment to ensure proper handling.
dose a 2005 kia amanti strut need pressed in place
dose a 2005 Kia amanti strut need pressed in place