I replaced mine on my '01 HL...it is done from inside. Open the hatch and pop the moulded plastic from the inside of the rear hatch to gain access to the bulb. I first attempted to change it from the outside..WRONG busted the light and had to buy new for $100....
In order to replace the 3rd Brake light in a highlander, you need to remove the Plastic Trim from the Back door right on top, and then, you will be able to access the Light bulb socket. The trim snaps back into place once your done. Be careful not to pull the trim to hard when removing from door as the clips could be rendered useless.
The third brake light on a 2007 Toyota Avalon is replaced by first removing the rear, retaining screws. The wiring harness can then be disconnect and the light bulb removed.
Yes, it has 7 seats
Open the rear hatch, there is a plastic panel that is at the top of the hatch which is long and thin.. It snaps out and the light is behind it. Careful though, the clips break.. I took it Toyota, I couldn't figure it out..
To replace the third brake light on a 2007 Toyota Avalon, first, open the trunk and locate the plastic cover that conceals the brake light assembly. Remove the cover by unscrewing or unclipping it, then disconnect the electrical connector from the old light assembly. Next, remove the old brake light by unscrewing or pulling it out, and install the new light by reversing the process. Finally, reconnect the electrical connector and replace the plastic cover.
How to change third brake light in 2009 Hyundai sonata
To change the third brake light on a 1999 Toyota Avalon, first, open the trunk and locate the access panel on the rear deck where the light is situated. Remove the screws or clips holding the panel in place, then carefully lift it out. Disconnect the wiring harness from the old light, replace it with a new bulb or assembly, and reconnect the wiring. Finally, reattach the access panel and secure it with the screws or clips.
To replace the third brake light bulb on a 2004 Toyota Matrix, first, open the rear hatch and remove the plastic cover that shields the brake light assembly by gently prying it off with a flathead screwdriver. Once exposed, twist the bulb socket counterclockwise to remove it from the assembly. Pull out the old bulb and insert a new one, then reassemble by reversing the steps. Finally, test the new bulb to ensure it’s functioning properly.
To change the third brake light on a 2007 Toyota Tundra, first, open the tailgate and remove the two screws securing the light assembly. Carefully pull the assembly away from the vehicle to access the bulb socket. Twist the socket counterclockwise to remove it, then replace the old bulb with a new one. Finally, reassemble the light by reversing the steps, ensuring it's securely fastened and the new bulb is functioning.
Currently, only SUVs and vans have third row seating. Some options are: Saturn Outlook, Dodge Journey, Hyundai Santa Fe, Buick Enclave, and the Toyota Highlander.
remove tail light and reach through
BMW servise