how do I replace timming chain on my nissan np 300 ka 20 motor
To replace timing chain on a 3.1 Chevy Lumina engine, you need to first make sure that your motor or engine is turned off. Then you need to remove the chain and replace it.
What motor is in it? ZD30? If so they have a timing chain, not a belt.
The 2006 Honda Pilot has a timing belt. The engine is a J35 series SOHC 24-Valve 3.5L V6 motor with cylinder deactivation (2WD models only).
it has a timing chain
timing CHAIN
If it is the 3.4L Twin DOHC version, it is a monstor job. This motor has timing belt and timing chain. The entire front cover of the engine has to come off to replace both.
I dont think you have to worry about that. 1999 has timing chain I dont think you have to worry about that. 1999 has timing chain I dont think you have to worry about that. 1999 has timing chain it does have a timing chain but if it has really high mileage its better to check and replace if it needs it because if it skips timing it could seriously damage the motor
Pull the head and remove cover on clutch side of motor loosen and rotate mortar pull chain out threw bottom with sprocket
It has a chain and the chances of it breaking are slim to none. It is designed to last the life of the engine.
You have to jack the motor up and remove the motor mount on the side of the motor and remove the timing chain cover wich is held on by seventeen 10mm bolts. I will tell you the timing chain kit will run you around 225.00 but if it has slipt or broke your gona have to have the head checked to see if you bent any valves
The 1998 Ford 5.4 Triton motor has a timing chain on it. The timing chain kits cost around $70 each.