0
To replace the wheel bearings on a 2003 Mitsubishi Lancer, first, lift the vehicle and remove the wheel. Then, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly from the steering knuckle by taking out the retaining bolts and using a hub puller if necessary. Finally, press out the old bearings and press in the new ones, reassemble the hub, and reinstall all components in reverse order.
What else can I help you with?
Does the 2003 Mitsubishi Lancer OZ Ralley use wheel bearings on the front as you were told by your mechanic that you need to replace one?
The Lancer does have wheel bearings on the front. If you would like to find them yourself, go to www.mitsubishiparts.com. The Lancer does have wheel bearings on the front. If you would like to find them yourself, go to www.mitsubishiparts.com.
How do you replace front wheel bearings on a 2003 Hyundai xg?
Bring it to the dealer!
How do youReplace wheel bearings on 2003 Hyundai Sonata?
How do you replace a wheel bearing on a Hyundai elantra and app cost please
Is the 2003 Mitsubishi Lancer front wheel drive rear wheel drive or four wheel drive?
The 2003 Mitsubishi Lancer has front wheel drive.
What is the wheel base of the 2003 Mitsubishi Lancer?
The 2003 Mitsubishi Lancer has a 8 ft. 6.4 in. (102.4 in.) wheel base.
How do you replace the timing belt on a 2003 Mitsubishi Lancer?
How do you replace the timing belt on a 2003 Mitsubishi Lancer?
Is the 2003 Mitsubishi Lancer-Evolution front wheel drive rear wheel drive or four wheel drive?
The 2003 Mitsubishi Lancer-Evolution has all wheel drive.
How do you change front wheel bearings on a 2003 Chevy silverado 4 wheel drive pickup truck?
you can't replace just the front wheel bearings, they are sealed so you have to replace the entire hub assemble and it will cost approximately $130 each side.
What is the wheel base of the 2003 Mitsubishi Lancer-Evolution?
The 2003 Mitsubishi Lancer-Evolution has a 8 ft. 7.3 in. (103.3 in.) wheel base.
Where is the pilot bearing located on a 2003 Mitsubishi Lancer?
Research indicates that there is no pilot bearing in the 2003 Mitsubishi Lancer. On some front wheel drives the clutch disk is splined to the main shaft which has two bearings in the transmission case. No pilot bearing is necessary.
Can I replace the front wheel bearings on a 2003 Mazda protege 5?
No, you need a press to remove and install the bearing.
Can you replace The rear wheel bearing or do you have to replace the entire wheel hub assembly on a 2003 ford expedition?
You can replace both... Bearing or Hub... Bearings are cheaper, but harder to find and replace. Hub assemblies are easier to replace, but slightly more expensive.
