To replace the water pump on a Hyundai Excel, first disconnect the battery and drain the coolant. Remove the serpentine belt and any components blocking access to the water pump, such as the timing cover or other belts. Unbolt the water pump from the engine block, clean the mounting surface, and install the new pump with a fresh gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks.
if you replace the water pump also plan on replacing the timing belt and tensioner. they are all part of the same assmebly and can't be done seperately.
Dynamite
You need to replace the water pump. It is likely the pulley came off because the water pump bearing failed and siezed.
Remove and replace it.
The water pump on a 2002 Hyundai Accent is replaced by removing the engine accessories, disconnecting the radiator hoses, and unbolting the pump. A new gasket and pump can then be attached.
Fuel pump is in the tank
The water pump circulates the coolant throughout the engine. When a pump fails on a 1997 Hyundai the coolant will not circulate properly and cause the engine to overheat.
you have to remove the belts and water pump pulley the water pump is located behind the timing cover.
how to replace window washer pump on 2008 hyundai elantra
To change the water pump on a 1996 Hyundai Excel, first, disconnect the battery and drain the coolant. Remove the serpentine belt, and then take off any components obstructing access to the water pump, such as the timing cover. Unbolt the old water pump, clean the mounting surface, and install the new pump with a new gasket. Reassemble the components in reverse order, refill the coolant, and reconnect the battery.
a certified mechanic can do this for $350
Under the back seat