You need to hook an OBD II code scanner up to the car to clear the light. Auto parts places will check your car for free and tell you what made the light come on in the first place. If you don't fix the problem, the light will more than likely come back on.
To reset the airbag light on a 2000 Daewoo Lanos, first, ensure that the vehicle is turned off. Disconnect the negative battery terminal and wait for about 10 minutes to allow the system to reset. Reconnect the battery, then turn the ignition on without starting the engine. If the airbag light remains on, it may indicate a persistent issue that requires diagnostic troubleshooting.
Have vehicle scanned to determine the problem
So the CODE word of the day is what?
Radio codes are set at the factory and cannot be reset. If you lost the code go to your dealer and have them look it up.
Disconnect battery and leave for about 10 min. Then reconnect. The check engine light went away on mine.
If an airbag light came on after taking off and replacing a steering wheel, the person needs to make sure the steering wheel is on correctly. Otherwise, to reset the light a person can use the OBDii scanner and clear the light.
La pompe a essence est sous le siège arrière coté passager </ H2>
This is often a factory security setting, meant to be a theft deterant. Usually a dealer can reset it for you. There also may be a series of buttons (a code) you can push on the radio to reset it. Call your dealer or Daewoo tech support.
you dont bring it in to the dealer the moduale is usually in the sterring colume and you have to take it apart to do this You can try disconnecting the battery for a min of 5 mins, make sure if your radio needs a code you have it
reset service engine light
A reset Engine Service Light comes on when an issue comes up with in the engine. This light can be reset by a tech or by fixing the problem.
One of the control devices is malfunctioning on the engine, and it needs to go to a shop for repairs. Simple things first though. If the light just came on, check to make your gas cap is on correctly, leaving it loose will cause the check engine light to come on. The light will reset itself after awhile of normal driving. If it does not have your local autopart store or shop read the code. That is the simplist way. Does the engine sputter while driving? That is an electrical problem with the spark plugs not firing when they should or not at all. Change the wres and plugs, check timing. That is what happened to mine