How do I reset the "Maint Reqd" light located on the instrument panel? This procedure should be used to reset the light when maintenance has been performed: 1) Turn ignition switch to the ON position. 2) Set the Odometer/Trip Display to the ODO mode 3) Turn the ignition switch to the OFF position. 4) Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5) The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off. 6) Release the Trip Meter RESET button. 7) Turn the ignition to the OFF position. 8) Turn the ignition to the ON position, and confirm that the Service Maintenance Reminder Light goes out. NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.
To reset the maintenance required light on a 2013 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then back on, and the maintenance light should be reset. If successful, the light will no longer be illuminated when you start the vehicle.
PLIZ HELP How can i reset the injector maintenance required in lexus gs350 2012
You can reset a maintenance light on a 92 Lexus SC400 by disconnecting the battery. Leave it disconnected for 10 to 15 minutes.
maintenance with engine
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
aperantly take the light out
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
RX350: With the car ignition off, press and hold the ODO Reset button and turn the ignition to the On position. Continue holding the ODO button depressed until the Maintenance Required light extinguishes, about 15 seconds.
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
How to reset oil maintanance on a lexus gx 460