To reset the maintenance required light on a 2013 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then back on, and the maintenance light should be reset. If successful, the light will no longer be illuminated when you start the vehicle.
take the negative on the battery off for about 10 min. this will reset the computer. if it does not go off just take it to your nearest advance auto or auto shop and have them run a diag. on it.
PLIZ HELP How can i reset the injector maintenance required in lexus gs350 2012
To reset the maintenance light on a Lexus ES 350, first, turn the ignition to the "ON" position without starting the engine. Next, press the trip meter reset button until the odometer displays "000000." Turn the ignition off, then press and hold the trip meter reset button again while turning the ignition back to the "ON" position. Release the button after the maintenance light blinks and turns off, indicating the reset is complete.
How to reset oil maintanance on a lexus gx 460
Bring the maintenance schedule program onto the information display. Hold the scroll button in until the maintenance schedule is cleared. The maintenance light should go off.
While your ignition is own reset your mileage to the total mileage. Turn the ignition off and then back on while holding in the odometer button until the maintenance light flashes several times and resets.
how to reset maintenance light on mercedes s550 amg
To turn off the maintenance light on a Lexus GS350, first, turn the ignition to the "ON" position without starting the engine. Next, press the gas pedal three times within five seconds. Finally, turn the ignition off, and when you restart the vehicle, the maintenance light should be reset. If the light remains on, you may need to check for any ongoing maintenance issues.
To reset the maintenance required indicator on a Lexus RX 350 after an oil change, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it doesn't reset, repeat the process to ensure it's done correctly.
Get it serviced
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner