This information is located in your driver's manuel under Gauges Page 67. 1. turn off the engine 2. press and hold the select/reset knob in the instrument panel, then turn the ignition switch to ON. 3. Hold the knob for about ten seconds until the indicator resets.
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
How to reset maintenace light on 1999 acura t l 3.2
To reset the maintenance required message on a 2008 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times quickly. This should reset the maintenance light. Finally, turn off the ignition and start the vehicle to ensure the message is cleared.
reminder to change oil you can reset it by inserting your key its actually pretty useless
press the reset and select switch at same, turn ign. key to II (On) and wait 10 seconds
reset switch by Honda or acura part number 07paz-oo10100
To reset the maintenance required light on a 1999 Acura Integra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The maintenance light should turn off, indicating that the reset was successful. If it doesn't reset, repeat the process to ensure it's done correctly.
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" for the maintenance reminder you wish to clear. Finally, confirm the reset, and the maintenance light should turn off.
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.
Depending on the mileage on the car, there are some maintenance requirements to be done by you, or the car dealer. The maintenance light will stay "on" until these maintenace issues are completed. Your owner's manual also tells you how to reset the maintenance light, and outlines the maintenance required per the mileage on the car.
Not quite sure how to do it manually, but if you spend the extra couple of dollars to go to a Acura dealer they will reset all the warning lights on the vehicle.