0
To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the total accumulated mileage of the vehilce (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the swtich down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
What else can I help you with?
How do you reset oil change light on Toyota Highlander 2012?
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
How do you reset the vsc light on a 2002 toyota highlander?
To reset the VSC light on a 2002 Toyota Highlander, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal to the floor three times within five seconds, then turn the ignition off. Start the engine, and the VSC light should be reset. If the light persists, there may be an underlying issue that needs to be diagnosed.
How ro reset engine check light for highlander 2003?
To reset a check engine light for a Highlander 2003, disconnect the battery for 10 minutes. After this time, reconnect the cables.
2001 Toyota Highlander check engine light reset?
start with engine off. press and hold that speedometer resetter while starting engine, check engine light will flash a few times then disappear.
What causes Toyota Highlander check engine light?
I have a 2003 Highlander. Whenever I get the oil changed, the check engine light comes on within a couple of days. I finally figured out that there is a hose under the air filter case that gets disconnected when the filter is checked. Just reattach the hose and the light will reset after a few restarts of the engine.
How you reset the light oil change Toyota tundra 2005?
how do you reset the check engine light on a 2005 Toyota tundra
How do you reset the check engine light in a Toyota Highlander?
Go call the Toyota car company or headquarters and ask the people who made the car.
How do you reset 2002 toyota highlander checkengine light?
To reset the check engine light on a 2002 Toyota Highlander, you can disconnect the negative battery terminal for about 15 minutes to clear the codes. Alternatively, you can use an OBD-II scanner to erase the trouble codes directly. After reconnecting the battery or using the scanner, the check engine light should turn off. However, ensure that any underlying issues causing the light to activate are addressed to prevent it from coming back on.
How do you reset 1990 Toyota Camry check engine light?
how to reset oil timing on 1990 toyota
How do you reset check engine light on 2003 Toyota 4 Runner?
Type your answer here... Hello how do you reset the check engine light on a 2003 Toyota 4runner. Thanks
How do you reset a check engine light on 2001 Toyota Sienna minivan?
The easiest way to reset the 2001 Toyota check engine light is to remove the check engine light fuse. The fuse can be found in the fuse box.
How do you reset check engine light on 2002 Toyota Highlander?
By repairing whatever tripped the light. Then you use an OBD2 scan tool to reset the light. You just have to disconnect the battery for a minute and then the check engine light go off, if the problem has been fixed!!! Disconnecting the battery will reset the light on most, but not all, 1995 & older cars, but on 1996 and newer cars this will rarely reset the light. It requires an OBD2 scan tool to reset the light on most newer cars.
