What worked for me was to unplug the antenna in the back of the radio and then enter the security code. Once the security code is entered, you can plug the antenna connector back into the radio.
Leave the radio on for 1 hour and it will reset and then accept the 5 digit security code.
I have a Acura Integra LS 1995 with an Acura Stereo, I have the Code but I can Not reset it , what are the steps to reset it? please help me ...
how to reset the radio security on a toyota 37409
There should be a acura business card in the owners manual that has a reset code
the easiest way to do this is by disconnecting the battery for about 3 minutes and connect it back. Make sure you have the radio code before doing this because after the radio resets it will ask for the code. This method will also reset the GPS in the car and the GPS will also ask for the code to turn on.
Howdo i reset my radio security code ml 500 2002
Radio codes of Acura Tl vehicles are part of a standard anti-theft system. To the reset the system just unplug the battery from the car for at least five seconds.
To reset the radio on a 1997 Acura 2.2CL, first, turn the ignition key to the "On" position without starting the engine. Then, press and hold the "Power" button on the radio until it turns off, then release it. Wait a few seconds, and press the "Power" button again to turn the radio back on. If the radio is locked, you may need to enter the security code, which can usually be found in the owner's manual or on a card provided with the vehicle.
Security code
i just went to the acura dealer today to have my radio reset from the error code displayed after my radio was disconnected from the power. they looked inside the glove box on the side and found the five digit code that must be entered to reset the radio. otherwise you must remove the radio and look on the back for the serial number and then your acura dealer can find the five digit code in the computer system. (this was going to cost me $100 an hour for the acura labor charge!!) check your glove box. The code I have is 62612.....I hope that works for you
How to reset security code in 2001 Z3
Wot make of radio u got? Reset? Is it working at all or does it need a new security code?