answersLogoWhite

0

To set the trailing timing on an '84 RX-7, first, ensure the engine is warmed up and running at idle. Use a timing light to check the timing marks on the crankshaft pulley and the timing cover. Adjust the trailing timing by loosening the distributor hold-down bolt and rotating the distributor slightly while monitoring the timing light until it aligns with the specified angle for trailing timing. Finally, tighten the distributor bolt and recheck the timing to ensure it remains accurate.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Related Questions

What is the timing on an 84 v6 Camero?

There is a sticker under the hood that tells what to set the timing to and at what idle speed.


Where is the timing gauge on a 84 Toyota Cressida?

There is no such thing as a timing gauge on a car. Timing is set with a tool called a timing light and a mechanic can do that for you and doesn't cost much money.


Where is the timing advance wire located on an 84 El Camino?

There is no such thing as a timing advance wire on a 84 El Camino.


Where are the timing marks on an 84 ford straight 6?

The timing marks on an 84 Ford Straight 6 is on the driver's side of the engine. It is above the crankshaft pulley, attached to the timing cover.


Does the 84 Nissan 300ZX have a timing chain?

no they just have timing belts no chains


How do you disconnect the timing advance to set the timing on an '84 Grand Prix 305 4 BBL Chevy automatic?

Unplug the vac advance on the dist.Also there may be a plug on the drivers side of the intake manifold containing 2 wires which when unpluged turns on the ck eng light.Sometimes the balancer outter ring slips and you have to replace the balancer to set the timing.


Will a 84 Camaro rear end fit a 76 nova10bolt?

no. the camaro uses trailing arms and coils. the nova uses leaf springs.


Detroit Tigers 84-85 season complete set how much?

84 season team set 7.00 at baseballcardshop.net


Where can you find a diagram of the vacuum lines on a 1985 Mazda RX7 Haynes is not very clear?

Go here: http://www.wankel.net/~krwright/cars/rx7/85_manual.html It is a complete factory service manual for the 85 RX7, i don't have the Haynes manual for comparison but i did find the diagrams to be easy enough to use on my 84 (even though a few here and there were scanned poorly). Hope it helps, Sincerely, a fellow first gen owner Go here: http://www.wankel.net/~krwright/cars/rx7/85_manual.html It is a complete factory service manual for the 85 RX7, i don't have the Haynes manual for comparison but i did find the diagrams to be easy enough to use on my 84 (even though a few here and there were scanned poorly). Hope it helps, Sincerely, a fellow first gen owner


Where can you find a diagram for the timing on an 84 GM?

at the dealer or in a good garage with computer.


Changed the plugs on a 84 fiero 2.5L. The gap is correct but now it knocks when you accelerate. Is this a timing issue?

not a timing issue since the iron duke 2.5 engine has no timing belt


What is the multiple 84?

Multiples of 84 include 84, 168, 252, 336, 420 and so on.