you have to bypass the ecu by bridging a wire in the diagnostics box from the ten port to the ground port then you can turn the distributer and with a timing light set it to 10 before tdc
A timing light and a 9/16" swivel socket to loosen the distributor.
como encontrar las marcas de un sephia 1999
To set the timing on a Volvo 240, first, ensure the engine is at operating temperature and then turn off the engine. Locate the timing mark on the crankshaft pulley and the timing pointer on the engine block. Start the engine and use a timing light to check the timing; adjust the distributor as necessary to align the timing mark with the specified degree (usually 12-16 degrees BTDC for the B230F engine). Finally, tighten the distributor hold-down bolt and recheck the timing to ensure it remains accurate.
When to change out a timing belt on 06 vectra sri Mileage wise
The Mazda MX-3 diagnostic socket typically features a 16-pin connector, similar to OBD-I or OBD-II standards. The specific terminals used for diagnostics include pins for power, ground, and communication signals. Commonly, terminals like pin 4 (ground) and pin 16 (battery positive) are utilized for establishing a connection with diagnostic tools. However, the exact terminal functions can vary based on the model year and market specifications.
The 2004 Mazda MAZDA3 has 16 valves.
The 2006 Mazda MAZDA5 has 16 valves.
The 2005 Mazda MAZDA3 has 16 valves.
The 2010 Mazda MAZDA5 has 16 valves.
The 2004 Mazda MAZDA6 has 16 valves.
The 2010 Mazda MAZDA6 has 16 valves.
The 2015 Mazda MAZDA6 has 16 valves.