To test the fuel relay on a 1990 Mazda B2200, first locate the relay in the fuse box under the dash or in the engine compartment. Use a multimeter to check for continuity by removing the relay and testing the terminals; you should see continuity between the terminals when the relay is energized. You can also swap it with a similar relay from another circuit (like the horn) to see if the fuel pump operates. If the pump works with the substituted relay, the original relay is likely faulty.
in the gas tank ?
If it is like the b2600i and b2200 it should be right behind the driver kick panel.
where is the fuel pump on a 89 Mazda b2200
it should be near the gas tank above the fram rail
How do you replace fuel pump 92 Mazda pick up B2200?
i own a 1990 fuel injected b2200 they didn't make very many but some of the 90-93 are injected.. finding parts are expensive and used parts for the motor are impossible to find
This should be located under the left drivers side kick panel.
In the fuel tank.
A Mazda B2200 engine with carburetor has 85 horsepower, and with fuel-injection has 105 horsepower.
14.8 gallons
look on the drivers side kick panel in front of the drivers door. remove the 4 screws on the panel by your left foot the relay switch should be mounted under the panel. good luck
17 gallon