To change the radiator hose behind the engine in a Daewoo Matiz, first, ensure the engine is cool and drain the coolant from the radiator. Then, access the hose by removing any necessary components that may obstruct it. Disconnect the old hose by loosening the clamps at both ends, replace it with a new hose, and secure it with the clamps. Finally, refill the coolant and check for leaks before starting the engine.
That connects the engine to the radiator is simply referred to as a hose. The radiator is connected to the engine by two hoses.
It is behind the radiator side engine mount.
Front (radiator side) of the engine, behind the motor mount.Front (radiator side) of the engine, behind the motor mount.
Radiator side of the engine, look behind the motor mount.Radiator side of the engine, look behind the motor mount.
To flush out the radiator of a Daewoo Matiz, start by ensuring the engine is cool and then remove the radiator cap. Place a drain pan under the radiator and open the drain valve to release old coolant. After draining, use a garden hose to fill the radiator with water, then run the engine for a few minutes to circulate the water. Finally, drain the water again and refill the radiator with fresh coolant to the appropriate level.
At the lower end of the engine Behind the radiator (4 cylinder) At the rear (6 cylinder)
It is behind the engine mount on the radiator side of the engine.
Follow the upper radiator hose from the radiator to the engine. It's behind there.
It is behind the grill and in front of the engine.
It is on the radiator side of the engine. It is behind the engine mount.
center front of the engine. Behind radiator side engine mount.
It is on the radiator side of the engine, behind the engine mount.