To unlock a Subaru Outback without a key, you can try using a slim jim or a lockout tool to manipulate the door locking mechanism through the weather stripping. Alternatively, if you have access to the vehicle's interior via another entry point, you can reach the door lock from inside. If these methods aren't feasible, consider calling a professional locksmith or your roadside assistance service for help. Always avoid damaging the vehicle during the process.
Subaru Outback "woodriff key" is good for the life of the vehicle.
To shut off the alarm on a 2004 Subaru Outback, you can typically press the unlock button on your key fob. If you don't have the key fob, inserting the key into the driver's door and turning it to unlock should also deactivate the alarm. If the alarm continues to sound, turning the ignition on and off may help reset it.
put the key in the door and unlock it
Use the spare key or call a locksmith.
If you have a newer model, with the remote unlock built in to the ignition key, press the button that looks like a trunk opening. This will open the tailgate but leave the other doors locked. Otherwise, press the Unlock button TWICE - this will unlock ALL doors, including the tailgate.
http://www.cars101.com/subaru/keyless.html#code%20alarm Should do it for ya...
To program a 2011 Subaru Outback key, you'll need to have both the new key and an existing programmed key. Insert the programmed key into the ignition and turn it to the "On" position for about 10 seconds, then turn it back off. Remove the key, insert the new key, and turn it to the "On" position for 10 seconds. After that, the new key should be programmed and ready to use. If you encounter difficulties, it's best to consult a Subaru dealer or a professional locksmith.
lights are on
To disengage the alarm on a 1998 Subaru Outback Legacy, insert the key into the driver's door lock and turn it to the unlock position. This should deactivate the alarm system. If the alarm continues to sound, you can also try starting the engine with the key, which may reset the alarm. If issues persist, consult the owner's manual or a professional for assistance.
If the rear hatch of your 1998 Subaru Outback won't unlock with the key or electric switch, you can try using the manual release mechanism. Look for a small access panel or cover near the latch area on the inside of the hatch; removing it may reveal a manual release lever. If that doesn't work, you may need to access the hatch through the rear seats by folding them down and reaching the latch mechanism from inside. If none of these methods work, consider consulting a professional locksmith or a Subaru dealer for assistance.
In the 2002 Subaru Outback, the hatch release lever is located on the driver's side door panel. It is typically a small, rectangular button or lever that can be pressed to unlock the rear hatch. Additionally, there may also be a release button on the key fob, allowing you to open the hatch remotely. Make sure the vehicle is in park for the hatch to open properly.
You need to find out if the fire or fuel quits and go from there If your Subie is a newer model (mine is 2015) you have to unlock it with the remote-equipped key, and start it with the same key. Otherwise you can run into the "engine immobilizer" that kicks in if you are not using the correct key with the proximity sensor built in.