To replace the front parking light in a Nissan 350Z, first, open the hood and locate the headlight assembly. Remove the securing clips or screws to access the back of the assembly. Disconnect the old bulb by twisting it counterclockwise and replace it with a new bulb, ensuring it's securely in place. Finally, reassemble the headlight assembly and test the new parking light to ensure it works properly.
To change the head light bulbs on a 05 Nissan 350z. You have to remove the front wheel and inner fender liner. You then should have enough room to reach in and access the bulbs. It is a pain in the ass, I took me a hour to change out a burnt out turn signal bulb.
very carefully
ON the front of the Radiator
how to reset nissan 350Z airbag air bag light and infiniti G35 air bag ...www.youtube.com/watch?v=g5UQIF3Euu0
I promise if you google this you'll find the answer
2007 and 2008 350Z Base, Enthusiast, Touring....18" Wheels.... Front 18 x 8 with 30mm offset and Rear 18 x 8.5 with 33mm offset 2007 and 2008 350Z Grand Touring and Nismo ...18" front with 30mm offset and 19" rear with 30mm offset
Jack up the front remove tire pull back (unclip) plastic wheel well cover to gain access to head light bulb.
5 x 114.3 offset 30 front and rear
Rear wheel drive.
In a Nissan 350Z, cylinder 1 is located at the front of the engine on the driver's side. The engine in the 350Z is a V6 configuration, and the cylinders are numbered from the front of the engine to the back, with cylinder 1 being the closest to the radiator. This layout is typical for V6 engines, where the odd-numbered cylinders are on the driver's side and the even-numbered cylinders are on the passenger side.
you are looking around $150 bucks for a better belts.
One option to reset is to disconnect the positive (+) battery cale on the battery for 3 minutes. Then reconnect it , this will reboot the computer and the light. SORRY: It doesnt work on the Nissan 2003 350z to do this.