ON the front of the Radiator
To remove the headlight housings on a 2003 350z first take the bumper off the car. Remove the wheel well covers to access the rear of the lights. Locate the four mounting bolts of the headlights and loosen them. Unplug and remove the housings.
It depends whether you are talking about the driver's door or the passenger one. There is a good description of both at http://www.350z-tech.com/zwiki/Tutorial:Front_Speaker_Installation It depends whether you are talking about the driver's door or the passenger one. There is a good description of both at http://www.350z-tech.com/zwiki/Tutorial:Front_Speaker_Installation
To change the head light bulbs on a 05 Nissan 350z. You have to remove the front wheel and inner fender liner. You then should have enough room to reach in and access the bulbs. It is a pain in the ass, I took me a hour to change out a burnt out turn signal bulb.
2007 and 2008 350Z Base, Enthusiast, Touring....18" Wheels.... Front 18 x 8 with 30mm offset and Rear 18 x 8.5 with 33mm offset 2007 and 2008 350Z Grand Touring and Nismo ...18" front with 30mm offset and 19" rear with 30mm offset
Jack up the front remove tire pull back (unclip) plastic wheel well cover to gain access to head light bulb.
5 x 114.3 offset 30 front and rear
Rear wheel drive.
You have to take off the door panel and you will see a greasy roller part there that you can remove. It helps the window to go up and down straight, but I've removed mine and it works just fine without it. No more greasy strips on both windows.
There are 2 next to the battery. One in front and one under the cowl
There is no "distributor" on a 350z.
located behind the battery compartment. you need to remove your battery and pull of the cover to get to them.