check power going to the switch , and power coming out of the switch ,if no power check fuses and wiring for open or shorts , then remove door panel and bench test the motor basically put power to the window motor
how to replace window motor ion 91 madza miata
Check power to window switch. Common cause. Check power to window motor. If none then check fuses/relays.
9 outta 10 times it will be a bad power window motor. I rarely see the window switch go bad.
To replace the power window motor in a 1996 Mazda Miata, first, remove the door panel by unscrewing the fasteners and gently prying it off. Disconnect the window switch and any other wiring connected to the panel. Next, unbolt the window motor from its bracket, detach the window regulator if necessary, and replace it with the new motor. Reassemble the door by reconnecting the wiring, attaching the panel, and ensuring everything is secure.
try to unbolt bottom of glass that mounts to the window regulaer track. take door panel offwhile key is on bang window with rubber or nylon mallot this can free up motor some times
http://www.ford-forums.com/ford-ranger/11517-procedures-replacing-power-window-motor-ford-ranger.html Try this link.
no
To repair the power window of a 1993 Mazda Miata, first check the fuse and switch for any issues. If those are functioning, the problem may lie in the window motor or regulator; you can test the motor by applying direct power to it. If the motor is faulty, it will need to be replaced; if the regulator is damaged, it should also be replaced for proper window operation. Always ensure to disconnect the battery before starting the repair to avoid electrical hazards.
For what type of motor?
The 1993 Mazda MX-3 features a power window switch that controls the operation of the vehicle's electric windows. If you're experiencing issues with the switch, it may be due to a blown fuse, a faulty switch, or problems with the window motor itself. Replacement switches can typically be found at auto parts stores or through online retailers. Be sure to check for proper installation and functionality after replacement.
To bypass the window switches on a 1994 Mazda 929, you can access the window motor wiring by removing the door panel. Once exposed, identify the motor wires (typically a positive and negative) and connect them directly to a power source, such as a 12V battery, using jumper wires. Ensure you do this carefully to avoid short-circuiting or damaging the motor. It’s advisable to consult a wiring diagram for accurate identification of the wires.
The motor probably needs replaced but it could be the wiring so have it checked out.