try to unbolt bottom of glass that mounts to the window regulaer track. take door panel offwhile key is on bang window with rubber or nylon mallot this can free up motor some times
check power going to the switch , and power coming out of the switch ,if no power check fuses and wiring for open or shorts , then remove door panel and bench test the motor basically put power to the window motor
how many motor mount has a mazda mpv 2000
Mazda MPV was created in 1989.
To replace the power sliding door motor on a 2004 Mazda MPV, start by disconnecting the vehicle's battery to ensure safety. Remove the interior door panel by unscrewing any fasteners and carefully prying it off. Once the panel is removed, locate the motor, disconnect its wiring harness, and unbolt it from the door. Install the new motor by reversing the steps, reconnect the wiring, and reattach the door panel before reconnecting the battery.
Generally the blower motor resistor is found close to the blower motor. It relies on the blower motor to keep it cool.
Completely remove the inside door panel. Since the window is down, the two screws that hold the window glass to the regulator should be easily acessable. Remove these two screws. Disconnect the regulator from the window glass. Push the window glass up to the very top. A bungy cord can be used to hold the glass up while the motor is being removed. Hook the bungy cord to the top of the door. Hook the other end to the bottom of the window glass.
Can a Mazda 626 engine fit in a Mazda MPV mini van?
Where is the thermostat located in a 2001 Mazda mpv
AC, alternator, power steering, and timing belts.
The Mazda Mpv 2000 timing chain
The switch is bad contacts inside it are corroded or dirty.
How to I remove the heater core hose from my 1998 Mazda MPV from the motor. The hose is hidden from view. Can't get a tool or my hands inside the small space to remove the clip. Can you help me?