To change the thermostat on a 2004 Mazda 6, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one (making sure the gasket is in place), and reassemble everything by reversing the disassembly steps. Finally, refill the cooling system with coolant and check for leaks.
* *
Trouble code P0128 means:Coolant thermostat (coolant temp below thermostat regulating temp)
Of course i do
To change the thermostat on a 2008 Mazda 6, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the radiator, then remove the upper radiator hose to access the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one, and reassemble by reversing the disassembly steps. Finally, refill the coolant and check for leaks before reconnecting the battery.
The thermostat in cars is usually located in a housing where the upper radiator hose connects to the engine.
from inside the hood, not hard but it is complicated.
Where would the knock sensor be located on a 2004 mazda 6?
The thermostat is under the air filter housing, which you need to remove to get access to the thermostat.
yes
For the 2.3L engine, 4.5 quarts with filter change.
Suggest dealership do it. On an m6 you'll have to drop the bumper deending on which headlight you need to change.
Mine does, but I can't figure out how to change the stereo to aux mode from fm or cd