To deactivate the alarm on a 1997 Acura, first, try unlocking the driver's side door with the key, as this may reset the system. If that doesn't work, insert the key into the ignition and turn it to the "On" position without starting the engine. You can also disconnect the battery for a few minutes to reset the alarm system. If issues persist, consulting the owner's manual or a professional may be necessary.
You can't disactivate anything...deactivate perhaps?
with a key fob
You disarm the security by unlocking the doors with a key or remote.
The only way to disarm it is with the oem remote.i would check the manual
To turn off the car alarm on an Acura use your key to unlock the driver side door.
The 3.0 Acura CL alarm system is wired into a car alarm brain. This will need to be disconnected. It is advised that a professional disconnects it as doing this incorrectly will leave the car unable to be used.
Read the instructions that came with the aftermarket alarm and follow them.
Alarm industry revenues were $13.9 billion in 1997
What do you want to stop?
How to permanently disable alarm system? You will need to find the alarm module. Likely, under the dash on the driver's side. Once you find the alarm module you should be able to unplug it. I'm not familiar with a Code alarm but the aftermarkets ones are all pretty much alike. The modules are usually black, about 3.5 inches square and about an inch thick.Hope this helps
how do i unlock radio 1997 acura rl 3.5
how much gas per mile on a 1.6 1997 acura