To install a starter in a 1994 Toyota Corolla, first disconnect the negative battery terminal to ensure safety. Then, remove any necessary components, such as the air intake duct or engine cover, to access the starter. Unbolt the starter from its mounting bracket and disconnect the electrical connections, including the battery cable and the solenoid wire. Finally, position the new starter in place, reconnect the wiring, and secure it with bolts before reassembling any removed components and reconnecting the battery.
my 94 Toyota corolla will not go into any gears .
yes
Dexron III
The drive belt on the alternator of a 94 Toyota Corolla won't turn if the bearing has seized. The alternator will need to be replaced.
96 and 97 Corolla and Prizm are the same, but, they have an extra crankshaft sensor, that the 93, 94, and 95 does not have,
The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.
If you do not see a drain plug, then the pan must be removed.
It should. The Prizm uses a Toyota engine. 4AFE for the 1.6L 7AFE for the 1.8L
Place the starter into the starter position and secure it with the starter retaining bolts. Connect the starter cables to the front of the starter.
Hey Hugo==In the rebuild kit is a schematic of the carb. GoodluckJoe
In most vehicles it's a small reservoir on top of the master cylinder.
take off old starter and install new one in its place. finished